Do You Use These 5 Materials for Making Makeup Prosthetics?

My very first experience doing my own makeup effects was when I was in the 4th grade.

There was a Halloween contest at my elementary school, and of all things, I wanted to be a spider.

Since there were no ready made spider-esque makeups, I chose a pimple face makeup prosthetic that I painted with grease paint. It was the first time I ever bought a prosthetic.

It wasn’t until many years later that I discovered I could make my own makeup prosthetics.

Making them is so simple. There really is no reason to buy them anymore.

Here’s what I’ve learned about what it takes to make your own prosthetic makeup appliances.

These are the five main types of materials used in making makeup prosthetics.

With the exception of liquid latex, I haven’t had experience using all of these. What I have here is just from my own research.

If you find anything that you’d like to add, I hope you’ll leave it in the comments for the rest of us.

Latex

Latex Makeup - Have You Used These 5 Materials for Making Prosthetics?
Application of latex and tissue for old age makeup – Pinterest

I call it plain ole liquid latex. It’s also called slip latex, slush latex, or mask makers latex.

I’ve bought it from several places: Halloween stores, specialty makeup stores, Amazon, and even Walmart.

I haven’t seen much of a difference in the quality in the ones I’ve used, but some say there is a difference in the more expensive brands. They tend to last longer and be more durable.

You can use liquid latex directly on the skin or create a makeup prosthetic with it.

If you want a good, in depth description on how to make makeup prosthetic using liquid latex you can get more detailed instructions at FX Supply.

Pros of using liquid latex:

  • Easy to use.
  • Easy to purchase and inexpensive.
  • Fast set up time.
  • Can be colored with water-based acrylic paint.

Cons of using liquid latex:

  • Can yellow over time.
  • Rots over time.
  • Some people have allergic reactions to latex, so you have to be careful.
  • Perspiration, oils, sunlight and heat can ruin latex.
  • Adheres permanently to porous materials (like jeans, t-shirts, etc.)

Cold Foam

Cold Foam Makeup - Have You Used These 5 Materials for Making Prosthetics?
Cold foam appliance by Rubies Costumes, Stella Sensel, MakeUp Artist – Pinterest

This material doesn’t need an oven to cure. That makes it easier to work with and faster than foam latex (more on that below).

Cold foam is also called flexible expanding urethane foam.

Artists use it to fill hollow pieces to keep them from being flimsy (i.e. horns). And it’s good for quick jobs since you don’t need any special equipment to create with it.

FX Warehouse has detailed instructions on how to use cold foam.

Pros of using cold foam:

  • Quick and easy to use.
  • Great for prosthetics where flexibility isn’t required (i.e. noses, chins, horns, etc.).
  • Cures in minutes rather than hours.

Cons of using cold foam:

  • Not flexible, so characters would not be able to emote (dramatize or show emotion) or talk through an appliance.
  • Since it is polyurethane, it can be dangerous to use on the skin when not cured. After it has cured, it is considered safe.

Gelatin

Gelatin Makeup - Have You Used These 5 Materials for Making Prosthetics?
Gelatine prosthetic – Pinterest

This material is quite versatile and, for the most part, easily accessible.

At LearnMakeupEffects.com, Stuart Bray gives a great synopsis of what makeup industry grade gelatin is and why any grade works well for practicing.

For a fantastic tutorial on making a makeup prosthetic using store bought gelatin, watch Pinkstylist’s tutorial on YouTube.

Pros on using gelatin:

  • Gelatin can be melted and reused.
  • Gelatin cuts and acts just like flesh.
  • Gelatin can be frozen to last longer.

Cons on using gelatin:

  • Larger pieces can be heavy.
  • Can usually only be used on the day you make it.
  • It rots, another reason to use it the same day.
  • It does not need very high temperatures to melt. Keep it out of your hot car or trunk.
  • It isn’t durable, and you have to be careful when handling it.

Here are some more tidbits on gelatin that I thought were important:

  • Gelatin is heavier to wear than foam latex.
  • Gelatin is less expensive than foam latex.

Foam Latex

Foam Latex Makeup - Have You Used These 5 Materials for Making Prosthetics?
Imaginarium FX Bird makeup made from foam latex – Pinterest

This material is often used in costuming, puppets and stop motion animation in place of clay.

The base material of foam latex is, of course, liquid latex. It’s mixed with other additives, which are often sold together in kits.

Pros of using foam latex:

  • It’s light and fluffy.
  • It’s reasonably easy to repair if torn.
  • You can paint it with PAX paint.
  • It can be made to be as tough as leather or very soft, depending on the additives used.

Cons of using foam latex:

  • It can begin to rot in as little as 6 months, so your work won’t last forever.
  • Mixing isn’t always easy, as there are many factors to consider, namely timing.
  • It has to be mixed in a dedicated mixer and cured in a dedicated oven. Neither can be used again for food.
  • The natural oils in your hands can alter the composition, so you have to wear gloves.

Silicone

Silicone Makeup - Have You Used These 5 Materials for Making Prosthetics?
Silicone Prosthetic Makeup by Megan Repp – Pinterest

Silicone is a product I can’t wait to try. The results are so realistic.

Watch this video of a good comparison between foam latex prosthetics and silicone. You’ll see what I mean.

The beginner kits I found were either Platsil Gel-10 or Smooth-On.

Pros of using silicone for prosthetics makeup:

  • Silicone makeup prosthetics don’t rot and will last for decades.
  • There are two components that you mix 1:1, making it simple to mix.
  • Curing is done at room temperature.
  • No special equipment needed.
  • Soft, so it flexes and moves with the move of real skin

Cons of using silicone for makeup prosthetics:

  • Silicone can be heavy.
  • It can be difficult to paint; the only thing that sticks to silicone is silicone.
  • It’s difficult to repair tears.
  • Some plasticene clay contains sulfur, which will react to silicone.
  • Silicone is often more expensive than foam latex.
  • Has a shine to it that may or may not compliment your prosthetic.
  • Cannot be reused.

Have something to add (or take away)? Let us know in the comments.

The following sites helped with this post:

Foam Latex – Wikipedia

The Scarlet Letters – Silicone or Foam Latex Next?

Makeup Prosthetics from Special Effect Supply

FX Warehouse – Using A/B Cold Foam

Special Effects Supply – Hot Foam vs. Cold Foam

Latex Mask Doctor

LiquidLatex.com

Silicone Appliance Mold – Part 2

12 Responses

  1. Latex: Some brands contain high levels of ammonia that can cause a burning sensation especially on people with sensitive skin and those who have recently shaved. Over long periods of time the ammonia can separate from the latex increasing the problem, so always be sure to mix!

  2. Hi Dana P

    Silicone is the best product to use as far as I’m concerned. Try adding Deadener to Platsil 10 to create super soft/flexible prosthetic pieces for a very realistic finish. You can also add a tiny drop of TinThix to either Platsil 10 – 25 or 00 to thicken the silicone for brush-on/verical use, like face casting. As you get more adventurous, try adding so Flocking to the mix as well as silicone pigment colours to get that natural skin colour and tiny veins found naturally under the skin. Only use silicone paints with silicone products 😉

  3. One other problem with Latex is that the ammonia can actually cause one to become allergic to it, because the ammonia is unhealthy and it’s applied with the latex one can get an allergic reaction to latex alone, be it in gloves, condoms or any other type of latex object (despite the ammonia having dissipated a long time ago)

    1. Hi, Sam. I can’t speak for the pros (I’m learning just like you), but I use scar wax all the time. It works great for skin abrasions, warts, even change the shape of facial features like the brow bone or nose. There are some really great uses for was, in my opinion. If you know of something better let me know!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.